FAMO Linear Irrigation Systems use up to 60% less water than flood irrigation and cover almost 98% of a rectangular field. Linear irrigation systems can operate from a furrow, above-ground cable. They can also be guided using GPS Navigation for precise movement. Water can be supplied from ditch, or hose-drag sources. You can make your choice, hard or soft hose in sections up to 660′ and a variety of diameters to fit your application.
Nelson® Irrigation offers a full line of sprinkler irrigation products including pivot sprinklers, pressure regulators, and end of pivot gun, and control valves. Unmatched farm irrigation sprinklers designed for your specific field conditions and crops that result in higher crop yields and quality at harvest
Senninger® Irrigation has been developing water and energy-efficient farm irrigation sprinklers for over 50 years. Valley® Irrigation offers high-performance sprinkler options, pressure regulators, and their products to help ensure water is distributed uniformly and with low application intensity - protecting your soil, crops, and savings.
| Lateral parameters |
Units |
Data-set(a) |
| 1 |
2 |
3 |
| Number of spans |
- |
7 |
| Effective span length(b) |
m |
27, 50.8, and 56.8 |
| Lateral length |
Horizontal |
m |
361.7 |
| along center-line |
m |
362.0 |
| Support tower height |
m |
3.7 |
| Elev. differential between span joint and field surface |
m |
3.62 |
| Maximum in-span elevation differentials(c) |
m |
0.65(0.74)/1.15/1.50 |
| Lateral diameter (d) |
mm |
162.3/136.4/101.6 |
| Absolute roughness |
Lateral pipe |
mm |
0.0015 |
| Drop-tube |
mm |
0.0015 |
| Drop-tube length range |
m |
2.6-4.4 |
| Drop-tube diameter |
mm |
19.05 |
| Field surface slope |
% |
0.0 |
| Local head loss parameters |
branching, outlet |
- |
0.03 |
| line-flow, outlet |
- |
0.008 |
| bending, connector |
- |
0.02 |
| span joints |
- |
0.04 |
| |
Reduction(e) |
- |
0.104/0.195 |
| Constant total head at the inlet( f) |
m |
19.2, 23.4, and 27.7 |
| Elev. at the inlet |
m |
4.84 |
UMC provides the most diverse and speed ratio motors in the industry
We offer the most speed ratios to meet the needs of different irrigation applications. UMC motor reducers are suitable for dual voltage, single-phase, and three-phase applications around the world.
As part of the balanced power transmission system, the motor reducer 3.5 can operate without faults for many years.
Design - UMC has discovered the industry's demand for motors and introduced the first helical gear motor reducer, establishing standards for irrigation power transmission systems for over 25 years. The product has evolved into a reliable and effective power transmission unit suitable for all applications, and has become the standard application for central bracket irrigation system power.
Quality - All UMC motor reducers pass strict testing and undergo high load testing on each unit before final assembly, fully meeting UL, CSA, CCC, CE requirements.
Motor reducer 460/380-Volt AC, 60/50 Hz motor using a 95% efficiency helical cylindrical gear reducer, used for power transmission of electrically driven center pivot sprinkler/translational sprinkler.The first stage reducer is used together with an independent motor to provide power transmission for the central support shaft sprinkler/translational sprinkler.
460/380 volt AC motor, used to provide electric drive for central pivot irrigator/translational sprinkler/Lateral moving irrigators
Gearbox
Designed for lightweight spans and small tires The UMC gearbox is designed for use on center pivots and lateral / linear irrigation systems with lightweight spans. It is a step up from the Moderate Duty™ gearbox with a larger diameter output shaft and larger output bearings allowing it to handle more overhung load.
We have designed and developed an indicator light underneath the tower box which will provide an instant visual alert if there is a break in the safety circuit. We also supply a stainless steel control panel which can be customized with any design, including your national flag. The control panel features an LED light for safety and convenience when operating at night. You also can scan the QR codes printed on our tower box and panel to find the trouble shooting videos and documents.
ss standard control pannel 11 cores high float tire
umc drive motor
intermediate towerbox endtowerbox
end gun nelson nelson sprinkler
boost pump kps komet for your choice
These configurations can be selected according to customer requirements
FAMO has passed system management as ISO9001, CE
FAMO One fully automatic production line guarantee the accuracy of cutting and welding, and guarantee the annual productivity of 162500m tubes for pivot or linear, at the same time, ERP system ensure the internal manufacturing and logistic quality.
FAMO products has been successfully installed and used in most provinces in China to irrigate wheat, corn, potato, alfalfa, sugarcane, flowers, and fruits. Export to Mali in Africa, Cuba in South American, Kazakhstan and Tajikistan in Middle Asia. We are looking forward to corporate with distributors and customers to achieve win-to-win and long term benefit.
When purchasing a center pivot system Lateral Moving Irrigators one must select:
Mainline size and outlet spacing;
Length, including the number of towers;
Drive mechanisms;
Application rate of the pivot;
The type of water applicator.
These choices affect investment and operating costs, irrigation efficiency, and crop production. Wise decisions will result in responsible water management and conservation, flexibility for future changes, and low operating costs.
Q:How can I pay for my items? What is the payment you can provide?
A:Usually by T/T, 30% down payment once PI confirmed, the balance will be paid after inspection and before shipment. L/C at sight
Q:How long is warranty?
A:Warranty covers our center pivot and lateral move systems up to 1 year concerning electrical equipment, and 10 years or 10,000 working hours for gearboxes and gear motors-whichever expires first.
We guaruntee 15year use concerning our galvanized eqipment against corrosion, and 3 years for our tires and rims.
Q:How long is production lead time?
A:Normally 30 working days. If client need urgently, we have a huge spare parts stock, we could finish assembly and testing in 7 days.
Q:What is the shipping terms you can provide?
A:Depnends on customer's requirements, we can provide different transportantin terms, such as EXW, FOB, CIF.
){kind=link}
){kind=link}